DESIGN, CONSTRUCTION AND CALIBRATION OF SENSORS FOR HPM MEASUREMENTS

PDF

Authors
  1. Seregelyi, J.S.
  2. Kashyap, S.
Corporate Authors
Defence Research Establishment Ottawa, Ottawa ONT (CAN)
Abstract
The measurement of High Power Microwave (HPM) coupling is an important diagnostic tool in the understanding of HPM interaction with complex structures. The quantities of interest include the electric and magnetic fields both in free space and at (or near) the surface of a body. The sensors used must be small in order to cause minimal perturbation of the ambient field and ot function over as wide a bandwidth as possible. In addition, the signal-to-noise ratio (SNR) must be as large as possible. The paper presents an engineering overview of the design and construction of various HPM sensors presently used at the Defence Research Establishment (DREO). Calibration methods for such sensors will also be briefly discussed.
Report Number
AGARD-CP-564-PAP-18 — CONTAINED IN 95-04681
Date of publication
01 Mar 1995
Number of Pages
11
DSTKIM No
95-04667
CANDIS No
151868
Format(s):
Document Image stored on Optical Disk

Permanent link

Document 1 of 1

Date modified: