Transcal User's Manual. V.2.3

PDF

Authors
  1. Cunningham, R.
Corporate Authors
Defence Research Establishment Atlantic, Dartmouth NS (CAN);Pernix Technology, Dartmouth NS (CAN)
Abstract
This report is a user manual for the transducer calibration software, referred to as TRANSCAL, for use in the Defence Research Establishment Atlantic (DREA) calibration facilities. This software was developed in three phases. In Phase 1, procedures for the transmitting voltage response and receiving response using swept pulse or continuous wave (CW) were developed. In Phase 2, additional calibration procedures were added for directional response measurements and reciprocity measurements. An interface to a servomotor control system for elevation positioning was added. Also in Phase 2, the existing Brickwall filter was replaced by a Krohn-Hite Model 3988 filter, resulting in software modifications. The user interface front panels were re-designed to enable use of a 17-inch display. In Phase 3, a standalone admittance/impedance measurement mode was added. The user manual was revised to include the new measurement mode, as well as consolidate the user manuals resulting from the two previous phases.
Keywords
Calibration software;Computer programs (TRANSCAL)
Report Number
DREA-CR-1999-139 — Contractor Report
Date of publication
01 Oct 1999
Number of Pages
137
DSTKIM No
CA001906
CANDIS No
513830
Format(s):
Hardcopy;Document Image stored on Optical Disk

Permanent link

Document 1 of 1

Date modified: