On the determination of the shock and steady state parameters of gelatine from cylinder impact experiments

PDF

Authors
  1. Nandlall, D.
  2. Gakwaya, A.
Corporate Authors
Defence Research and Development Canada, Valcartier Research Centre, Quebec QC (CAN);Laval Univ, Quebec QUE (CAN) Departement de Genie Mecanique
Abstract
For a soft body projectile striking a target or the shock loading of a soft body material, the determination of the interface shock pressure, shock speed and applied steady state pressures is important but has been hindered by technical challenges even with the use of sophisticated embedded pressure sensors in the target surface. Difficulties interpreting the results render the accuracies sometimes questionable or impossible to reproduce. Here we propose a simple impact experiment using a force sensor and an analysis procedure to derive the interface pressure from the force/time history. The results are compared to those obtained from shock Hugoniot and penetration equations. We came upon the presence of a dynamic pressure that is significantly higher than the expected stagnation pressure. This method could be used to determine and characterise the shock and steady state pressures of a wider range of materials under impact and shock loading conditions.
Keywords
Low strength material impact;Soft body material impact;shock pressure of gelatin impact;bird impact loading;bird strike;impact and shock loading to human surrogate materials;shock pressure from force history
Report Number
DRDC-RDDC-2018-P069 — External Literature
Date of publication
01 May 2018
Number of Pages
16
Reprinted from
International Journal of Impact Engineering, Elsevier, Vol 116, pp. 22 33
DSTKIM No
CA045986
CANDIS No
806456
Format(s):
Electronic Document(PDF)

Permanent link

Document 1 of 1

Date modified: